+91 - 93732 87475 info@anacon.in
✕

What Is Stack & Stack Emission Testing

Stack Emission Testing
  • A stack is a large industrial chimney that is designed to emit and discharge hot exhaust air, particulate matter, and products of combustion; into the air. The heights of these chimneys are purposefully kept high, so that the released matter, gases, fumes, and vapours from the industries are not discharged near the surface of the land, and therefore do not pose any sort of danger to the living surrounding.

Listed are the stacks used by huge industries:

  1. Boiler stacks
  2. Flue gas stacks
  3. Furnace stacks
  4. DG set stacks
Stack Emission Testing
  • Stack emission testing is also known as ‘Source Sampling Test’, ‘Emission Test,’ ‘Compliance Test’ and ’ Performance Test.’ The test methods vary depending upon the industry and type of pollutants released. Performing stack emission testing ensures that the industry is compliant with regulated emission limits in your permit.
  • The stack emission testing is majorly performed on boiler stacks, exhausts from printers, discharges from bag filters, thermal oxidizers, etc.

Need of Stack Emission Testing Labs in India

Stack Emission Testing
  • To monitor the emission dispersed from the stack is a mandatory requirement for all the companies of India; this is put on record in many ‘environment agencies’ and ‘local authority permits.’ The requirement for stack emissions testing is gauged from the environmental impact a business is doing.
  • The testing helps the inspectors, facility managers, and other stakeholders to check the amount of industrial waste and pollutants generated from the stack. The accurate emission data gathered from the test results give the industry an upper hand when it comes to proving that your industry complies with the instructions laid by the regulatory bodies.
  • The data obtained from the testing result also helps in obtaining engineering data for pollution control. This engineering data helps in specifying the design of the control equipment and in testing the efficiency of the control equipment.

Following Tests Are Performed For Stack Emission Testing

  • The test methods entirely depend on the industry type and the number of pollutants released.  The specified tests are carried out to determine a pollutant concentration and the emission rate. 

     

    Temperature

    Velocity

    Particulate matter

    Sulphur dioxide

    Oxides of Nitrogen

    Carbon monoxide

     

     

    Oxygen

    Carbon dioxide

    Acid Mist (H2SO4)

    Flow rate

    Heavy metals (as Pb)

    Volatile Organic Compounds as per EPA 502/524 mix

From an owner’s standpoint, it is vital to understand the pollutants that are releasing from your industry. Anacon Laboratories is accredited with ISO 17025, our expertise lies in testing the following parameters:

  •  Total Particulate Matter
  • Carbon Monoxide
  • Carbon Dioxide
  • Oxygen
  • Volatile Organic Compounds
  • Nitrogen Monoxide
  • Nitrogen Dioxide
  • Nitrous Oxide
  • Water Vapour
  • Sulphur Dioxide
  • Hydrogen Chloride
  • Hydrogen Fluoride
  • Ammonia
  • Heavy Metals
  • Mercury
  • Benzene
  • Benzo(a)pyrene
  • PolyChlorinatedBiphenals
  • Polycyclic Aromatic Hydrocarbons
  • NOx inc. Nitric Acid Mist
  • Hexavalent Chromium
  • Hydrogen Sulphide
  • Odour
  • Bioaerosols
  • PM10 & PM2.5
  • Speciated VOCs
  • Amines
  • Phenols
  • Aldehydes
  • Formaldehyde
  • Hydrogen Bromide
  • Chlorine
  • Fluorine
  • Bromine
  • Velocity/Temp/Flow
  • Dioxins

Type of Industries for which we provide Stack Emission Testing

From an owner’s standpoint, it is vital to understand the pollutants that are releasing from your industry. Anacon Laboratories is accredited with ISO 17025, our expertise lies in testing the following parameters:

  • Asphalt
  • Agricultural Industries, Fertilizers
  • Ethanol Production Facilities
  • Cement & Lime Production
  • Chemical Manufacturing
  • Grain & Food Production
  • Foundries, Ferrous and Non-Ferrous Metals
  • Fuel Loading Terminals
  • Natural Gas Production
  • Medical & Pharmaceutical Industries
  • Textiles Industry
  • Mining and Mineral Processing Operations
  • Petroleum Refining
  • Incinerators (Medical, Municipal & Hazardous Waste)
  • Electronics & Semiconductor Industries
  • Coatings & Polymeric Materials
  • Commercial Printing Operations
  • Power Utilities and Cogeneration Facilities
  • Reciprocating Internal Combustion Engine
  • Pulp and Paper Industries
  • Synthetic Organic Chemical Manufacturing
  • Polymer, Resin & Rubber Manufacturing
  • Wood Products Industries
Food Microbiology Testing

Why Choose Anacon For Stack Emission Testing

  • Anacon Laboratories has garnered success in delivering accurate test reports of stack emission. Our professionals are well-versed in rendering services as per the requirement. The reports generated by our professional team of experts help you in checking the permit requirements. Our testing labs are equipped with cutting-edge machinery and our analytical services are backed by qualified and experienced staff members.
  • With a team that specializes in stack emission testing, Anacon Laboratories can help you in understanding the quality of your stack emissions.

Accredited, Certified & Recognised by

Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory
Testing Laboratory

Testimonials

GET IN TOUCH














    Send
    Send